We aim for the best care and treatment of your patients

The medical devices industry includes various applications in which flow measurement and control is crucial. A dialysis system, for example, must be able to be cleaned quickly and easily after each run. This applies to all sorts of applications that process (body)liquids, like urine, blood and plasma in which avoiding contamination and infection is crucial. Our flowmeters are also used in production processes, such as dosing and filling liquids in ampoules or bottles.

The flowmeters are used to measure low viscosity liquids. The recommended flow range, temperatures and pressures are listed on the respective product pages. If you want to make sure our flowmeters will work in your process conditions, feel free to contact one of engineers here for one-on-one support.

The flowmeters are tested with liquids; when using gasses we therefore cannot make any claims with respect to accuracy and longevity. 

Due to the use of fluoropolymers (PVDF and PFA) the flowmeters have excellent chemical resistance.

The reflection measurement used in the flowmeter means that opaque and colored liquids can be measured. And in the case a white opaque liquid is used, we can supply the flowmeter with a black turbine.

We always recommend using a filter in line before the flowmeter. Recommended pore sizes are 100 – 250 micron depending on the model. Particles that can pass through these pores are no problem for the flowmeter.

We have a Filter Disc with a pore size of 100 micron available in our shop which can be used in line before our flowmeters.

The repeatability of measurements is 99.85%.

Accuracies of 99% can be achieved with our turbine flowmeters.

We have four different sizes available that cover flows from 20 mL/min up to 200 L/min.

Shop flowmeters that cover the following flow ranges:

• 0.02 – 4.5 L/min
• 0.5 – 25.0 L/min
• 1.5 – 40.0 L/min
• 3.0 – 200.0 L/min

PVDF disposable flow tubes can be sterilized with a gamma radiation dose up to 50 kGy.