Home
In biotech- and pharmaceutical production processes, reliability, accuracy and safety are of the essence. We offer flow measurement solutions that meet the strict requirements set by aforementioned industries. In addition, our flowmeters comply with USP Class VI high quality standards.
Flowmeters for Bioprocessing
The biotech flow meter can be used for both flow control and volume control . Easy exchange of the wetted parts and onwards a quick recalibration prevent contamination and infection in the respective process. Our disposable single use solutions reduce down-time in your process to the minimum.
Equflow Turbine Flowmeters
How to Use
-
How can Equflow's flowmeters be used in biopharma applications?
Our disposable single use flowmeters are successfully applied in bioreactors, liquid chromatography, various liquid filtration biotech processes (TFF, UF) and other equipment’s in biotech- and pharma industries.
-
What can Equflow turbine flowmeter measure?
The flowmeters are used to measure low viscosity liquids. The recommended flow range, temperatures and pressures are listed on the respective product pages. If you want to make sure our flowmeters will work in your process conditions, feel free to contact one of engineers here for one-on-one support.
-
Can the turbine flowmeters of Equflow measure gasses?
The flowmeters are tested with liquids; when using gasses we therefore cannot make any claims with respect to accuracy and longevity.
-
Can Equflow turbine flowmeters measure chemicals and/or corrosive liquids?
-
Can opaque and/or colored liquids be measured by Equflow turbine flowmeters?
The reflection measurement used in the flowmeter means that opaque and colored liquids can be measured. And in the case a white opaque liquid is used, we can supply the flowmeter with a black turbine.
-
Can liquids with particles cause issues in use with Equflow turbine flowmeters?
We always recommend using a filter in line before the flowmeter. Recommended pore sizes are 100 – 250 micron depending on the model. Particles that can pass through these pores are no problem for the flowmeter.
We have a Filter Disc with a pore size of 100 micron available in our shop which can be used in line before our flowmeters.
Get the right flowmeter
for every process
In addition to production and clean room facilities, we have engineers who, together with the customer, fine-tune the sensor system for the applications in which the flow of liquids must be measured and/or controlled.
Turbine Flowmeters
Standard
Series
- Suitable for neutral, corrosive, opaque liquids
- Outstanding performance
- Applicable for high pressure processes
Turbine Flowmeters
Disposable Single Use Series
- Fast and easy exchange of the wetted parts
- Suitable for gamma irradiation
- Comply with US Pharmacopeia Class VI
Equflow Turbine Flowmeters
Technical Specifications
-
How repeatable are the measurements?
The repeatability of measurements is 99.85%.
-
How accurate are the measurements?
Accuracies of 99% can be achieved with our turbine flowmeters.
-
What flow range can I measure using Equflow flowmeters?
We have four different sizes available that cover flows from 20 mL/min up to 200 L/min.
Shop flowmeters that cover the following flow ranges:
-
Are Equflow flowmeters gamma stable?
PVDF disposable flow tubes can be sterilized with a gamma radiation dose up to 50 kGy.
Thank you for your interest in our Flowmeters
You can download the specifications down below.
Why Equflow
- Affordable
- Over 20 years of experience
- Complete validation package available