Equflow 6010 Batch Controller

A batch controller can be programmed for a wide variety of applications. Setup is easy for single or multi-stage batching. Automatic overrun correction keeps the batch size accurate, even over time and with system wear. It can record grand total, or nonresettable grand total with a time base of seconds, minutes, hours or days. The user can program a conversion factor, and configure a non-resettable grand total, and password protection.

Batch Control Features

  • Start/Pause/Stop, Change Batch with Front Buttons
  • Display Batch Total, Rate, Grand Total, Count or Preset
  • Single or Multi-Stage Batch Control (Up to 8 Relays)
  • Automatic Overrun Correction
  • Rate in Units per Second, Minute, Hour, or Day
  • Automatic or Manual Batch Control
  • Low or High Flow Alarms while Batching
  • 9 Digit Grand Total with Overflow Feature
  • Count Up or Down with Each Batch
  • Program and Control with a Computer Using MeterView Pro
  • Available in Panel Mount or Desktop Mount version

 

Additional Features

  • Pulse, Open Collector, NPN, PNP, TTL, Switch
    Contact, Sine Wave (Coil), Square Wave Inputs
  • NEMA 4X, IP65 Front
  • Universal 85-265 VAC or 12/24 VDC Input Power
  • Dual-Line 6-Digit Display, 0.60" & 0.46"
  • Programmable Displays & Function Keys
  • Sunlight Readable Display Models
  • 2 or 4 Relays + Isolated 4-20 mA Output Options
  • External 4-Relay & Digital I/O Expansion Modules
  • USB, RS-232, & RS-485 Serial Communications
  • On-Board Digital Input
  • Modbus® RTU Communication Protocol Standard
CharacteristicsPFA Disposable Flow Meter 0045PFA Disposable Flow Meter 0085Model c
Flow meter ranges0.06 - 2.0 L/min0.5 - 20 L/min
Repeatability0.150.15
Maximum pressure20 bar15 bar

Request sample Request a quote Download brochure